![]() The default password is “1111”, you can change the password later from the “IP Setting” tab. But for the data security reason, you need correct password to enter the configuration pages. There are six tabs on the top of interface which can configure different types of network settings. Once a connected Godex printer is detected, it will be listed on the start page. The start page will display the basic information of connected printer and your PC.Ĭlick the magnifier icon to search the Godex printers which are connected via Ethernet port in you network environment. STEP-06Once the installation is completed you will see the NetSetting icon on your desktop.Ĭlick the NetSetting icon to start the program you will see the start page as below. STEP-05Click ”Next” to start the installation. STEP-04Specify the “Installation Folder". The Setup Wizard guides you through the installation procedure. STEP-03Follow the instructions on the screen. Make sure the printer is off before plugging the power connector into the power jack. Before you connect the equipment to the power outlet, please check the voltage of the power source. STEP-02Select the icon for the NetSetting installation file and click it to start the installation. Safety instructions Please read the following instructions carefully. STEP-01Insert the product CD in the CD/DVD drive of the host computer and open the "Ethernet" folder on the CD. A walkthrough for downloading your GoDex DT4 or DT4x printer driver and the settings to work with check-in on a Windows computer. ![]() To install the NetSetting, please follow below steps. It is available on product CD or can be downloaded from official website. Then click "Apply".The NetSetting software is used to manage the network configurations when connecting the printer via Ethernet port.
0 Comments
Leave a Reply. |